Articles delegate-en/4480-4520 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 4480 - 4520   digest:
FTP client to implicit FTPS server
  06/04-03:40 . 4480  Marvin <> [158]
___ Yep, that was a typo on my end. I have it correct in my config though. This is what I use: delegated -P21 STLS="-fsv,im0.5" ADMIN=bla@bla.. If I remove the STLS all together active ftp works just fi
  06/04-03:49 . 4481 (Yutaka Sato) [22]
___ Comparing and seeing the difference between your LOGFILEs with and without STLS will give us hints. As shown by my LOGFILE, I could not reproduce your problem. Cheers, Yutaka 9 9 Yutaka Sato <y.sato
  06/04-03:50 . 4482  Marvin <> [212]
___ Below the logging of a failed active connection: 06/03 20:46:08.50 [7541] 1+0: -- Fork(OnetimeServer): 7522 -> 7541 06/03 20:46:08.52 [7541] 1+0: (0) accepted [48] -@[]eupdwsappb308.acm
  06/04-03:58 . 4483  Marvin <> [95]
___ And this is one of a succesful connection with STLS removed. I'm using version 9.9.4-pre5. Thanks for your help. 06/03 20:54:40.11 [7774] 2+0: -- Fork(OnetimeServer): 7765 -> 7774 06/03 20:54:40.11
  06/05-17:55 . 4484 (Yutaka Sato) [85]
___ Hi, I can't see why this problem is described as: What does "normal ftp connection" mean ? First I thought it as the non-SSL connection, but your broken PORT connection seems SSL based. How "PASV" w
ASN.1 custom filter
  06/05-18:41 . 4485 (Yutaka Sato) [22]
___ Hi, With "iptables" on Linux or "ipfw" on BSD, you can forward TCP connections via DeleGate to the original destination host (server) with "odst.-" as follows: SERVER=tcprelay://dst.- Cheers, Yutaka
STLS=-mitm parameter and HTTPS sniffing
  06/05-19:00 . 4486 (Yutaka Sato) [41]
___ Hi, STLS=mitm is available only in the binary distribution of DeleGate. <URL:> STLS=mitm does more than decryption/encryption of SSL. Acting as a
FTP client to implicit FTPS server
  06/05-19:11 . 4487  Marvin <> [103]
___ I see what you mean. I need to connect through active ftp to this server however it seems that this server also accepts ftps connections throwing delegate off. Is there a way to force a ftp instead
  06/05-20:34 . 4488 (Yutaka Sato) [34]
___ Hi, What is the server? You can restrict the application of STLS as follows: STLS="-fsv:ftp:!specific-server" If the firewall just translates addresses but not ports, you can specify the IP-address
ie8 with ftp proxy
  06/16-18:17 . 4489  rewat pathumthawornsakul <> [15]
___ IE8 cant access to ftp server with delegated ftp proxy. How to fix it ?
IPv6 SRCIF support
  06/25-17:28 . 4490  Chris Murton <> [85]
___ Hi, I was wondering if there are plans to support the setting of the source IPv6 address of outgoing traffic from Delegate (as per SRCIF for IPv4 connections)? Thanks, Chris
  06/26-02:26 . 4491 (Yutaka Sato) [17]
___ Hi, I'm not so sure but SRCIF seems supporting IPv6 already... Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industrial Scienc
  06/26-03:16 . 4492  Chris Murton <> [27]
___ Hi Yutaka, How about in a condition where the proxy has both IPv4 and IPv6 networks attached to it, and you want to specify a different outgoing source address for both v4 and v6? :) Thanks, Chris
  06/26-03:40 . 4493 (Yutaka Sato) [22]
___ Hi, You can specify multiple SRCIF conditionally on the address family of the destination using a pseudo hostname "_4" and "_6" for IPv4/IPv6 respectively. Thus it could be as this for example: SRCI
  06/26-03:57 . 4494  Chris Murton <> [29]
___ Hi Yutaka, That's working perfectly, thanks for your help! Chris
  06/26-04:08 . 4495 (Yutaka Sato) [36]
___ Hi Chris, Since I have no real experience with IPv6, feedbacks like yours are very welcome. Yutaka
match for X-Request
  07/01-03:07 . 4496  Jens-Erik Hansen <> [34]
___ Hello Yutaka, I currently try to match for X-Request or X-Request-Original in an xml-secure stream. A very basic CFI-script like this one: Header-Filter: -tee-n-v /dev/tty shows the following result
  07/01-12:29 . 4497 (Yutaka Sato) [47]
___ Hi Jens, You are right. Selecting a FTOCL filter over HTTP with CFI's "X-Request" condition has been disabled since 9.2.3-pre4, in which conditional CFI for FTOCL was modified to reduce the overhead
  07/01-21:51 . 4498  Jens-Erik Hansen <> [64]
___ Hello Yutaka, thank you very much for your reply. Today I tried delegate 9.9.4-pre9 and I made some extraordinary experiences trying to accomplish my task which leads me to the assumption that I mad
  07/03-03:33 . 4499 (Yutaka Sato) [89]
___ Hi Jens, The following test works with 9.9.4-pre9 but not work with 9.9.4-pre8. [url.cfi] X-Request-URL: /test/test.txt Header-Filter: -tee-n-v ---(1) without SSL [server] delegated -P9999 -fv SERVE
DeleGate: question regarding the PROTOLOG parameters
  07/03-22:38 . 4500  "Kopplinger, Andreas" <> [81]
___ Yutaka Sato, I have a question regarding the PROTOLOG parameters. At the moment, the startscript contains the following: PROTOLOG='${LOGDIR}/Protolog_${PORT}.${PROTO}[date+.%d]' It would like to use
  07/04-07:58 . 4501 (Yutaka Sato) [56]
___ Hi, The quote <'> and double quote <"> does not have meaning and unnecessary to represent a parameter value in DeleGate. It just necessary when you pass a parameter to DeleGate via your command shel
  07/05-03:23 . 4502  "Kopplinger, Andreas" <> [181]
___ Hi, thank you for the fast reply! With ":format" and "%{field}", i am refering to the following part of the DeleGate Manpages. I would like to add some of these parameters to PROTOLOG='${LOGDIR}/Pro
  07/05-08:00 . 4503 (Yutaka Sato) [38]
___ Hi, For example, you can put a log line of the common logfile format extended with Referer, User-Agent and Via fields with DeleGate's extension as this: PROTOLOG=':%X "%{Via}" %D' Of course you can
  07/06-16:20 . 4504  "Kopplinger, Andreas" <> [175]
___ Hi, Thank you very much for your answer, this helped a lot! Kind regards Andreas ---Original Message--- From: Yutaka Sato [] Sent: Sun 7/5/2009 01:00 To: feedback@delegat
Data connection refused, but data is forwarded
  07/09-21:43 . 4505  "Gusti Benawi" <> [46]
___ Hello, I configured delegate to act as reverse proxy. FTPServer <---> Delegate <---> Internet Delegate takes exactly 20 seconds every time to build the data connection in passive mode. This 20 secon
  07/09-22:14 . 4506 (Yutaka Sato) [25]
___ Hi, If it is normal as you expected, why don't you suppress PASV toward server by FTPCONF="nopasv:sv" ? Or you should stop the retrial and shorten the timeout with other configuration parameters. I'
  07/09-22:25 . 4507  "Gusti Benawi" <> [27]
___ To shorten the timeout I can use TIMEOUT=con:seconds parameter. How can I stop the retrial? He abused me, he beated me, He defeated me, he robbed me, In those who harbour such thoughts Hatred never
  07/20-18:57 . 4508 (Yutaka Sato) [56]
___ Hi, Sorry, I thought it can be done with a generic MAXIMA="contry:1" for TCP connection establishment, but the retrial in this case is specific to FTP data-connection by src/inets.c:ftp_conndata().
Error Setting up Delegate to do FTPS -> FTPS Proxying
  07/23-09:04 . 4509  "Reggie Jackson" <> [228]
___ I am trying to setup delegate to be a proxy for FTPS connections to a FTPS server. Basic structure is: Internet ==> firewall ==> ftp proxy (dmz) ==> firewall ==> ftp server (internal) I am able to c
  07/23-13:49 . 4510 (Yutaka Sato) [39]
___ Hi, Last month there found so many cases in which core dumps can be caused with SSL (or gzip as filter threads) and they were fixed in 9.9.4-pre{9,10,11}. So you are recommended to try the latest be
HTTP Protocol Version Control
  07/23-14:25 . 4511  <> [35]
___ Hi Yutaka, We would like to have delegate respect the HTTP Protocol Version as sent back in the response from the server (for some servers only). Is this possible? We have temporarily addressed this
Error Setting up Delegate to do FTPS -> FTPS Proxying
  07/24-01:14 . 4512  "Reggie Jackson" <> [133]
___ I have updated to the 9.9.4-pre11 code and am trying it out. the command I am using is: ./delegated.pre STLS=fcl -P990 SERVER=ftps MOUNT="/* ftps:// */" ADMINPASS=<removed> -v I
  07/24-09:07 . 4513 (Yutaka Sato) [35]
___ Hi, The log shows that DeleGate connected to the server port :990 (FTPS) which is expected to be in SSL implicitly. So you need to add the following parameter to start SSL unconditionally: STLS=fsv
  07/24-09:55 . 4514  "Reggie Jackson" <> [101]
___ When I switched to the FSV command I am now getting the output: 07/23 18:54:07.07 [6925] 1+0: -- Fork(OnetimeServer): 6924 -> 6925 07/23 19:54:07.07 [6925] 1+0: (0) accepted [35] -@[]10.10
  07/24-10:01 . 4515 (Yutaka Sato) [17]
___ You need both of STLS="fcl" (for client) and STLS="fsv" (for client) or STLS="fcl,fsv" Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Ad
  07/24-10:23 . 4516  "Reggie Jackson" <> [52]
___ Excellent, When I am able to connect now, but not able to STOR a file, also if I try to browse a recursive directory I get an error. Also it's not showing me my home directory it's showing me a fold
  07/24-12:37 . 4517 (Yutaka Sato) [33]
___ I'm not sure which MOUNT is your real configuration, but anyway your MOUNT parameters are equal to MOUNT="/* ftps://" with unknown option "/*" or "*/" after a space character. Th
HTTP Protocol Version Control
  07/27-18:27 . 4518 (Yutaka Sato) [46]
___ Hi, Of course I'm respecting the HTTP specification. The protocol version is hop-by-hop value and must be adjusted to the version of the message sent from DeleGate to the peer. When chunked encoding
DeleGate/9.9.4 (STABLE) -- fixes for freezing in SSL and gzip
  08/03-12:59 . 4519 (Yutaka Sato) [82]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.9.4 (STABLE) -- fixes for freezing in SSL and gzip This release is a major fix to make DeleGate "mul
Compilation error on AIX 5.3
  08/05-20:59 . 4520 [110]
___ Hi I receive errors when trying to compile Delegate on AIX 5.3: root.system@hostname /home/user/delegate9.9.4 -n gcc -O2 -x c++ -DQS -I../gen -I../include -O -c version.c -DLICENSEE=\"""\" -n gcc -O
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:01/19 06:47:52 (2 sec) Expires:01/19 12:47:50 @_@V