Article delegate-en/3049 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Newsgroups: mail-lists.delegate-en

[DeleGate-En] Re: IPV6 support
09 Aug 2005 19:52:50 GMT Sandro Latini <>

Yutaka Sato wrote:

>In message <_A3046@delegate-en.ML_> on 08/09/05(22:41:21)
>you "Sandro Latini" <> wrote:
> |i'm testing Delegate alpha 9.0.4 for ipv6 and i think is working very fine.
> |I'm using an ipv6 tunnelling with sixxs ( and i have a my /48
> |class. When i have started delegated (i'm using it over VPN at my job) i
> |could see ipv6 page, but it's using the first ipv6 address, that is my end
> |point to sixxs and not the address binded to my /48 class on eth0. Is it any
> |solution? I have read documentation and i didn't find anything about it (i
> |think). I'm very happy for ipv6 support! Good work! :)
>When you have multiple interface on the host of DeleGate, and you need
>to specify an interface, with address xxxx for example, it can be done
>as this for the incomming port,
>  -Pxxxx:port
>and as this for the outgoing port
>  SRCIF=xxxx
>  D G   Yutaka Sato <>
> ( - )  National Institute of Advanced Industrial Science and Technology
>_<   >_ 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568 Japan
>Do the more with the less -- B. Fuller
I have started delegated in this way:

delegated -P192.168.0.3:90 SERVER=http RES_AF=64 SRCIF=eth0
delegated -P192.168.0.3:1080 SERVER=socks RES_AF=64 SRCIF=eth0

and my eth0 interface is:

eth0      Link encap:Ethernet  HWaddr 00:40:F4:BC:86:2C
          inet addr:  Bcast:  Mask:
          inet6 addr: 2001:1418:133::/48 Scope:Global
          inet6 addr: fe80::240:f4ff:febc:862c/64 Scope:Link
          RX packets:243179773 errors:0 dropped:8838 overruns:0 frame:0
          TX packets:257183055 errors:0 dropped:3248 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3460060772 (3299.7 Mb)  TX bytes:3821260210 (3644.2 Mb)
          Interrupt:5 Base address:0xf00

but i'm still getting my sixxs interface ipv6 address on navigation:

sixxs     Link encap:IPv6-in-IPv4
          inet6 addr: 2001:1418:100:59::2/64 Scope:Global
          inet6 addr: fe80::51ae:13ab/64 Scope:Link
          inet6 addr: fe80::c0a8:3/64 Scope:Link
          UP POINTOPOINT RUNNING NOARP  MTU:1280  Metric:1
          RX packets:1671068 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1421788 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1201222427 (1145.5 Mb)  TX bytes:141217541 (134.6 Mb)

My VPN is not ipv6 enabled and i can't tunnel in another way my
connection. I think there is no solution, right?



  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]