Articles delegate-en/1912-1958 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 1912 - 1958   digest:
Authorizer and ESMTP...
  10/02-04:02 . 1912 (Yutaka Sato) [23]
  The third field of MYAUTH, if exists, must specify the protocol name of the server. Thus it should be like this: MYAUTH=usrname:password:smtp See <URL:
Configure Delegate 7.9.13
  10/02-04:13 . 1913 (Yutaka Sato) [24]
  The proxy server which web browsers like Internet Explorer use is HTTP proxy server, that is the proxy server which talks with clients in HTTP, then relays to a server of certain protocol including
Java Mail and Delegate
  10/02-18:50 . 1914  Leong Sun Hei Joseph NCS <> [29]
  Hi, I have been having trouble communicating to Delegate using Java Mail 1.2. This is the error i got. It just doesn't read the username and password, in another words doesn't authenticate at all. F
Halting a download
  10/02-19:09 . 1915  "Develop" <> [74]
  Hello Delegate, I use your web cache as a local 'booster' for a dialup connection and it helps significantly. While it is a great tool that works well, there is one annoying feature that I would lik
  10/03-05:44 . 1916 (Yutaka Sato) [17]
  TIMEOUT=takeover:1 will do. The default value of this "takeover" is in the list of "what might have to be changed" in DeleGate/8.0.X. Cheers, Yutaka @ @ Yutaka Sato <> http://www.
Configure Delegate 7.9.13
  10/03-14:23 . 1917 [68]
  HTTP or Socks proxies.
QOS in Delegate
  10/03-14:26 . 1918 [80]
  I see new thread of Delegated begins. Question to developers: will be implemented traffic shaping mechanism (like delay pools in Squid) in this version?
Does Delegate support Java Mail Authentication?
  10/03-18:58 . 1919  Leong Sun Hei Joseph NCS <> [9]
  Hi, Tried all ways to sent authentication from Java Mail 1.2 to Delegate (had already set AUTHORISER in delegate) and it doesn't authenticate. Does Delegate supports Java Mail's Authentication? Than
  10/07-17:18 . 1920  "Gary R. Winton" <> [89]
  I am trying to setup the pop proxy. I have it working but when the user's name is bob@dlkpc.. It does not work. This only happens when the email server requires the full name and domain to logon. It
Mount options
  10/07-17:20 . 1921 [80]
  I meet problem with mount options - I tried mountoption from=+=/ddd/sss/somefile and this don`t work Options works fine. Is this right behavior of Delegated or error?
  10/07-17:32 . 1922 (Yutaka Sato) [22]
  "+=" is not available in mount option. Instead, you can define a named list of hosts with HOSTLIST parameter, then refer the name in MOUNT option, for example, define ".mntfrom" as HOSTLIST=.mntfrom
RELEASE DeleGate/8.0.5(ALPHA) -- fixes for CFI, PASV/FTP/Socks and extension for ftp://user*host@proxy
  10/08-04:20 . 1923 (Yutaka Sato) [35]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate8.0.5.tar.{gz,bz2} DATE: Oct 7 17:56 JST 2002 TA
Search Engine Notification
  10/09-18:50 . 1924 [383]
  View HTML version online, please <a">click here</a> Our topic-specific spiders have suggested that your page or posting be included in the Od
RELEASE DeleGate/8.0.6(ALPHA) -- changes for HostList by client-host/user-auth, ext. for ABOR/FTP
  10/11-03:58 . 1926 (Yutaka Sato) [32]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate8.0.6.tar.{gz,bz2} DATE: Oct 11 03:29 JST 2002 T
CMAP with FFROMCL and a specified protocol does not work
  10/11-04:23 . 1927 (Yutaka Sato) [33]
  Maybe a reason is that FFROMCL filter is inserted before any data is conveyed on the connection by whith the real protocol is judged. By the way can't use FTOSV like this? CMAP="filter.cfi:FTOSV:htt
  10/14-00:14 . 1928  Joachim =?iso-8859-1?q?F=F6rster?= <> [20]
  Hallo! It works! :-) Thank you! Another question: Is there a way for a "Header-Filter" to get the IP address of the local client, which sent the request (to the http-proxy)? (I heard of "CGI"-Filter
  10/14-06:29 . 1929 (Yutaka Sato) [36]
  Hallo, Check the following environment variables (which are compatible with the standard CGI interface): REMOTE_ADDR ... IP-address of client REMOTE_HOST ... hostname of client "CGI:" filter gets th
URL filter ??
  10/14-15:16 . 1930 [18]
  hi: I was use delegate for http proxy. I want to control access of http by filting URL, now I have realized that: PERMIT="http:*:*" MOUNT="/*%Scmd.exe%S = rcode=403" so I can contorl all web sites o
sslway and root cert
  10/14-21:33 . 1931  "Stephan Kraemer" <> [172]
  hello i have a little problem :)) is it possible that the sslway manage a private certifikate like this configuration , see below 1. here is the problem . that certifikate isnt alone it must use 2 r
  10/15-19:34 . 1932 (Yutaka Sato) [30]
  The message "No permission" does nothing to do with SSL certificate. It is just the result of some (default) access restriction of DeleGate. See <URL:>
Antwort: Re: sslway and root cert
  10/15-21:31 . 1933  "Stephan Kraemer" <> [114]
  Thanx .. for ur mail :)) but the answer of the ie browser is that the cert isnt valid or its is not trusted .. so that i think that i must tell the sslway thet he must use the 3 certs ... the client
URL filter ??
  10/16-07:07 . 1934 (Yutaka Sato) [22]
  MOUNT="http://*%S/nmail%S = rcode=403,dst=web1" will do. Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National Institute of Advanced Industrial Science
  10/16-07:20 . 1935 (Yutaka Sato) [30]
  Of course, more simply the following will do. MOUNT="http://web1/nmail%S = rcode=403" But this one matches only when the hostname in URL is written as "web1" literally. The former one matches with a
Antwort: Re: sslway and root cert
  10/16-16:32 . 1936  "Stephan Kraemer" <> [273]
  Hy Thanx for the last mail .. i have changed for a test to the beta 8_0_6 and i have the following response 10/16 08:14:54.40 [708] 1+0: MOUNT[2]X[0] /-* = default 10/16 08:14:54.40 [708] 1+0: MOUNT
  10/16-18:13 . 1937 (Yutaka Sato) [37]
  Your log shows that no sslway.exe is found. If your sslway.exe is placed at a proper location, you will see in the log where the executable is found, like above. Cheers, Yutaka @ @ Yutaka Sato <
  10/17-10:37 . 1938 [49]
  I do it as what you tell: MOUNT="http://*%S/manual%S = rcode=403,dst=" but I can access normally. and I try the second method too,the result is same. why? ga
  10/17-13:44 . 1939 (Yutaka Sato) [38]
  I can see it to work as follows. What do you see with the same test? % delegated -P8080 -vv SERVER=http MOUNT="http://*%S/manual%S = rcode=403,dst=" 10/18 01:03:49.52 [4225] 1+1: (0) ac
Antwort: Re: sslway and root cert
  10/17-14:34 . 1940  "Stephan Kraemer" <> [119]
  hello thanx for the answer .. and i try to change te permission.. but wich permission is it .. that i must change ... remittable dont work .. if i try to say remittable="*" for all that dont work ..
=?gb2312?B?tPC4tDogUmU6IFtEZWxlR2F0ZS1Fbl0gtPC4tDogUmU6IFtEZWxlR2F0ZQ==?= -En]_URL filter ??
  10/17-15:39 . 1941 [138]
  i do the same test,no help the log of 8080 is: 10/17 14:20:44.64 [13212] 0+0: WORKDIR=/var/spool/delegate-nobody/work/8080 10/17 14:20:44.64 [13212] 0+0: MOUNT[0]=[0] /-* = 10/17 14:20:44.64 [13212]
  10/17-19:00 . 1942 (Yutaka Sato) [22]
  You seem to be using DeleGate as an origin server with virtual hosting rather than as a proxy server. If so, a MOUNT parameter like this will do. MOUNT="/manual*%S = rcode=403,host=" Ch
=?gb2312?B?tPC4tDogUmU6IFtEZWxlR2F0ZS1Fbl0gtPC4tDogUmU6IFtEZWxlR2F0ZQ==?= -En]_ =?gb2312?B?tPC4tDogUmU6IFtEZWxlR2F0ZSAtRW5dX1VSTCBmaWx0ZXIgPz8=?=
  10/17-19:15 . 1943 [42]
  I set: delegated -P8080 SERVER=http MOUNT="http://*%S/manual%S = rcode=403,dst=" if just take it as proxy server,how? thank you! gaocy DCN phone:82705259 feedback@delegate .org (Yutaka
  10/18-18:54 . 1944 [43]
  my setting of delegate: delegated ADMIN=gaocy@http CACHE no -P8080 MAXIMA=randfd:128,delegated:2048,standby:64 SERVER=http MOUNT=" http://*%S/manual%S = rcode=403,dst=" gaocy DCN phone:
RELEASE DeleGate/8.0.7(ALPHA) -- fixes for NNTP and MOUNT
  10/22-03:47 . 1945 (Yutaka Sato) [35]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate8.0.7.tar.{gz,bz2} DATE: Oct 22 03:35 JST 2002 T
ftp access control?
  10/22-17:27 . 1946  <> [2]
  can delegate do some access control of ftp proxy? such as to forbid some ftp sites or some ftp directories
problem of update
  10/23-18:28 . 1947 [13]
  Now I update delegate7.9.10 to delegate8.0.7 config is same with the before the problems is: 1. the speed of start is much slower than before 2. Access such as , it tel
proxy chain
  10/23-19:37 . 1948  "Hantke, Jens (GOD)" <> [34]
  Hello, I want to encrypt communication between two Delegates. This works fine with the following parameters: local delegate: delegated -P8008 -vt FMD="sslway" MASTER="master-delegate:8008" DGROOT="p
transparency proxy under linux
  10/24-16:42 . 1950 [16]
  hi: I have changed delegate7.9.10 as transparency proxy under linux7.3 successfully ,which combined with iptables.To do it just to add getsockopt in function of ddi.c OpenServer. but When i update i
delegate 7.9.10 url filter
  10/24-19:31 . 1951 [8]
  delegate7.9.10 can do url filter ? can it control url to the level of directory and files ? gaocy DCN phone:82705259
proxy chain
  10/25-01:14 . 1952 (Yutaka Sato) [58]
  On 10/23/02(19:37) you "Hantke, Jens (GOD)" <> wrote in <_A1948@delegate-en.ML_> So far, connecting to MASTER-DeleGate via SOCKS-proxy is supported, but conn
SSL to escape ISP packet filtering
  10/25-01:44 . 1953  "Jairon" <> [100]
  My university has recently blocked IRC by dropping all packets which look like the IRC connection protocol. The only way I can think of getting around this is running an encrypted proxy (SSL). Curen
proxy chain
  10/25-16:08 . 1954 (Yutaka Sato) [49]
  Another solution, without modifying the code of DeleGate but a little bit eneffecitve, is using one more DeleGate locally just for relaying toward MASTER via SSLTUNNEL. local DeleGates: delegated -P
url filter
  10/25-20:50 . 1955  xiaohai_shi <> [12]
  Hi, I'm using delegate8.0.7 as http proxy. I have read the discussion between you and about url filter. I did the same test as you tell he(she). the result
irc, socks5 and ident
  10/28-00:08 . 1956 [10]
  Hi What I wanted is to allow users to send/resume dcc on irc behind NAT. I started socks5 proxy with server=socks switch and connected to it with irc client. All went fine exept ident. It is set to
Proxy not forwarding to web page..
  10/31-02:00 . 1957  Walter Sherman <> [82]
  Ok, I'm very new to Delegate and I have just taken the responsibilities of maintaining our server. As far as I can tell we run DeleGate/6.1.12. When a older version of Netscape 4.73 accesses the URL
VIP Sports Treatment For You
  10/31-04:58 . 1958 [53]
  View HTML version online, please click ___ Our wish is to reach the correct person click
Empty-Articles = [1925][1949]
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:04/10 07:51:55 (2 sec) Expires:04/10 13:51:53 @_@V