Articles delegate-en/1386-1441 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 1386 - 1441   digest:
DeleGate/7.6.1 (ALPHA) -- extensions for filtering HTTP headers and HTML tags, etc.
  11/01-14:27 . 1386 (Yutaka Sato) [30]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.6.1.tar.{gz,bz2} DATE: Nov 1 14:06 JST 2001 TA
Time Outs
  11/02-05:23 . 1387  "Torben Janssen" <> [25]
  Hello, I played a bit with delegate and have one problem where i can't find a solution. I start delegate with delegated DGROOT=/var/cache/delegate CACHEDIR=/var/cache/delegate/cache LIBPATH=/var/cac
  11/02-07:15 . 1388 (Yutaka Sato) [23]
  Hi, Could you show me the whole error message including the reason of the error? Since I've not heard such problem, something special might be in your situation... Cheers, Yutaka @ @ Yutaka Sato <y.
RFC1123 violation w/ delegate SMTP-SMTP
  11/02-15:18 . 1389  "Peter Bauer" <> [1452]
  Hi, I think I discovered a "Bug", or better: a protocol violation, when using delegate as a SMTP-to-SMTP gateway. The outgoing SMTP data stream appends the delegate version to the HELO command, whic
  11/02-16:35 . 1390 (Yutaka Sato) [85]
  Hi, Adding DeleGate's version was a trial to inform the client side software to help shooting delivery trouble ... At that time I did not know a SMTP implementation which cause a troble with the ext
Time Outs
  11/02-18:06 . 1391  Torben Janssen <> [96]
  Hi, thanks for your quick answer. The errormessage: Cannot Connect Connection failed by DeleGate on `' Tried from the client to the server http://www.le
  11/02-18:33 . 1392 (Yutaka Sato) [43]
  Both the error message and the following log seem to show that TCP connection is not possible from your host of DeleGate to the host of the destination server. Are you sure that you can connect to t
Wingate Server and Delegate
  11/04-00:42 . 1393 (Fadi Towfic) [16]
  Hi, Thanks for your time, the Delegate server is very helpful for Network admins/Home users! I am currently dual booting between Windows 98SE and Redhat Linux 7.1. I use Wingate Server to share my i
Time Outs
  11/04-20:43 . 1394  "Torben Janssen" <> [68]
  Hi, you're right. The delegate server can't connect to these sites. It's very strange, but it seems to be not a delegate bug. thank you very much. I'll try to find the problem so I can use delegate
Wingate Server and Delegate
  11/05-04:58 . 1395 (Yutaka Sato) [14]
  Sorry but I know nothing about WinGate thus I don't know how to make DeleGate to act like it... Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National In
Transparent Proxy & delegate
  11/08-03:32 . 1396  Attilio Vaccaro <> [13]
  Hi, is it possible to use delegate as a transparent SOCKS proxy? What I would like to do is to have a delegate daemon running on a firewall manage the traffic coming from a private subnet and resend
  11/08-12:49 . 1397 (Yutaka Sato) [20]
  will do. Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National Institute of Advanced Industrial Science and Technology (AIST) _< >_ 1-1-4 Umezono, Tsuku
  11/08-13:03 . 1398 (Yutaka Sato) [30]
  Or more simply the following will do. In both case, note that you may have to sepcify a PERMIT parameter or so to give access permission to the clients if they are on networks which is not connected
  11/09-16:26 . 1399  Attilio Vaccaro <> [68]
  Thanks for your answer, but I fear that it's not what I'm looking for. I'd need to send to the SOCKS server all the SOCKSable traffic passing through the gateway running delegate, but not directed t
  11/12-18:33 . 1400  Emmanuel Cerisier <> [99]
  Hi Yutaka, I couldn't get trough posting to your ML, so I send directly this query to, hoping you'll approve it and post it to the newsgroup/ML. Thanks, Regards Emmanuel Cerisi
delegate and Netscape messenging server
  11/12-20:39 . 1401  Emmanuel Cerisier <> [43]
  On 11/12/01(18:33) you Emmanuel Cerisier <> wrote this query to to the newsgroup/ML. timed out with Could you tell me where you got the obsolete address? The server "smtpgate.e
  11/12-21:29 . 1402 (Yutaka Sato) [41]
  Could you tell me where you got the obsolete address? The server "" retired a month ago. The address "" is the right address of the entrance of the newsgroup (
  11/12-21:33 . 1403  "Christine Hall" <> [97]
  Hello, I visited and I noticed that you are not listed on some search engines. I am sure you can increase the number of people who visit . Do you know TrafficMagnet
Howto? SSL FTP Tunneling
  11/14-04:34 . 1404  "Bryan Dees" <> [40]
  Hello Yutaka, I'm using your latest stable release of Delegated on Red Hat 7.1 as a proxy server front end to my network. I managed to figure out how to proxy FTP and HTTP without any difficulty. Bu
  11/14-06:22 . 1405 (Yutaka Sato) [27]
  Hi, A simple example to relay HTTPS/SSL client to HTTPS/SSL server is like this: delegated -P8443 SERVER= FSV=sslway FCL=sslway You will be able to access this DeleGate from
SOCKS 4 Server reply messages
  11/14-07:15 . 1406  Claudio Topolcic <> [26]
  Hello! We downloaded DeleGate version 7.5.4 and installed it as a SOCKS Server on a Mandrake Linux PC. Your directions for doing this were very simple and we had no problems there. However, we did h
Howto? SSL FTP Tunneling
  11/14-07:27 . 1407  "Bryan Dees" <> [71]
  Good Morning! Thank you for the example. However, when using the FTP protocol in place of the https protocol I get the following error: 11/13 15:22:23.10 [17830] 1+0: ConnectToServer: DFLT=ftp://goa
  11/15-00:43 . 1408 (Yutaka Sato) [38]
  Hi, So can I understand my HTTPS example worked without problem in your environment? Does this server "" talk "FTPS" which start SSL without negotiation? If so, some
  11/15-01:47 . 1409  "Bryan Dees" <> [114]
  Hello, Yes, thank you very much. Your HTTPS example allowed me to relay without any problems to my HTTPS server. My FTP server '' uses AUTH TLS negotiation. I added your su
SOCKS 4 Server reply messages
  11/15-01:54 . 1410 (Yutaka Sato) [77]
  Hi, Thank you for your pointing out the problem. Could you tell me the names of the client products? Maybe I did not read this part of document when I rapidly implemented SocksV4 in DeleGate about 6
Howto? SSL FTP Tunneling
  11/15-02:18 . 1411 (Yutaka Sato) [50]
  Hi, I see. Is your command literally as above? I cannot understand your intention to specify FSV only to ftp-data connection while specifying FCL only to ftp control connection. Since SSL session fo
SOCKS 4 Server reply messages
  11/15-04:26 . 1412  Claudio Topolcic <> [30]
  Yutaka, Thank you for your reply. I have just done some testing. Netscape 6.2 seems to refuse the reply messages. It FINs the connection immediately after receiving the reply message. NS 6.2 can sup
Howto? SSL FTP Tunneling
  11/15-04:41 . 1413  "Bryan Dees" <> [525]
  Hello again, I think i'm close but i'm still having trouble with ftp-data I think. I get established, get one line of data then a subsequent 521 error from FTP. On the server i'm using the following
  11/15-05:08 . 1414 (Yutaka Sato) [22]
  11/15-05:19 . 1415 (Yutaka Sato) [23]
  Bryan, (Sorry, I sent the previous message in broken format) Sorry but I don't know with what application I can read the content type: Could you show me the dialog of the FTP client and the relevant
  11/15-06:08 . 1416  "Bryan Dees" <> [250]
  Sure, here's the Delegate log: 11/14 12:30:08.83 [23970] 0+0: --INITIALIZATION DONE-- 11/14 12:30:23.86 [23970] 0+0: AcceptByMain: TIMEOUT(children=0, timeout=15) 11/14 12:30:45.08 [23973] 1+0: -- F
  11/15-08:57 . 1417  "Bryan Dees" <> [70]
  I finaly got it all to work! delegated \ -P10021 \ SERVER= \ CMAP="sslway -st:FCL:ftp:*:*" CMAP=sslway:FCL:ftp-data:*:* I took out the CMAP for FSV and added the end
  11/16-02:32 . 1418 (Yutaka Sato) [43]
  Bryan, Thank you for your sending detailed log. Inspecting it I found that there are tow problems or bugs in FTP-DeleGate. - DeleGate does not start SSL session (by inserting FSV filter) for ftp-dat
  11/16-03:40 . 1419  "Bryan Dees" <> [84]
  Our FTP server accepts both SSL and non-ssl FTP off the same port. So, what you are saying makes complete sense. In order for me to relay both SFTP and FTP I had to use two separate commands/ports,
  11/16-06:59 . 1420 (Yutaka Sato) [122]
  Hi, Maybe the problem which occurs when this DeleGate is used by non-SSL client is that ftp-data connection is always in SSL unconditionally. The enclosed patch to sslway.c will introduce "-ad" opti
  11/16-07:31 . 1421  "Bryan Dees" <> [151]
  Yutaka, Are you adding the following patch to your FTP site? If not, how shall I add the patch to 7.6.1 filters/sslway.c file? Thank You, Bryan ---Original Message--- From: [ma
  11/16-09:45 . 1422 (Yutaka Sato) [15]
  I uploaded a little refined version at the following location: Cheers, Yutaka @ @ Yutaka Sato <> (
LDAP authentication for ftp proxy
  11/17-02:11 . 1423 [52]
  Hello, I'm looking for a way to do LDAP authentication with your ftp proxy. I used these parameters, but it don't seem to work : SERVER=ftp RESOLV="" RELIABLE=* REMITTABLE="ftp,ldap" ADMIN=pr4cqbdyi
Howto? SSL FTP Tunneling
  11/17-03:48 . 1424  "Bryan Dees" <> [38]
  I wish I got this kind of support from the vendors I actually pay money for :) Thank you Yutaka, your fix worked like a charm. I'm in business thanks to you.. Sincerely Yours, Bryan Dees Airborne Ex
LDAP authentication for ftp proxy
  11/19-18:59 . 1425 [161]
  Ou!!! I don't know that delegate support ldap autentification. It is true? And how it work? WBW, Vadim Mironov
  11/19-23:20 . 1426 (Yutaka Sato) [16]
  Me, neither. Not true unfortunately, but I feel it' interesting to figure out how it should work. Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National
  11/20-00:19 . 1427 [236]
  Example (at my organization): 1. We have two different autentification domains - Novell and Windows. One thing where it intersect - LDAP mechanism. 2. We don't need ftp service on Novell and need au
Shutout files as dynamic ACL
  11/20-02:25 . 1428 [192]
  May I use shutout mechanism for temporary disabling some clients? I can't -hup Delegate every minute and need some method to eliminate "bad guys". How looks like shutout files? How I can use this? W
  11/20-06:58 . 1429 (Yutaka Sato) [24]
  Yes. To shutout a client host with IP-address xx.xx.xx.xx, create a file named like follows: DGROOT/adm/shutout/xx.xx.xx.xx The contents of the file can be anything or empty. And specify the timeout
DeleGate/7.6.2 (ALPHA) -- fixes for MOUNT, SMTP, SOCKS, etc. and extensions for HTTP, SSLway, etc.
  11/20-10:01 . 1430 (Yutaka Sato) [34]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.6.2.tar.{gz,bz2} DATE: Nov 20 09:43 JST 2001 T
Having problems connecting too your ftp server ....
  11/20-23:39 . 1431  Santiago =?iso-8859-1?Q?=C1rraga?= <> [27]
  [arraga@mauser arraga]$ ncftp -u anonymous NcFTP 3.0.2 (October 19, 2000) by Mike Gleason (ncftp@ncftp..). Connecting to delegate.a02 PROXY-FTP server (DeleGate/7.
SOCKS 4 Server reply messages
  11/21-03:08 . 1432 (Yutaka Sato) [61]
  Hi, Me neither. I myself seldom use Socks for HTTP protocol. Thus I did not know, and am surprised to know that even recent WWW browsers does not support SocksV5. Maybe authentication mechanism intr
  11/22-05:53 . 1433  wasp_ <> [33]
  Dear users! Wee organ my two user:) Uses delegate 7.6.1 but only in this the in shape I know start:( system "/etc/delegate/src/delegated -P192.168.0.4:8080 ADMIN=danka SERVER=http"; system "/etc/del
DeleGate/7.7.0 -- extensions for Socks (Socks4A and FORWARD=socks)
  11/22-17:17 . 1434 (Yutaka Sato) [23]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.7.0.tar.{gz,bz2} DATE: Nov 22 16:59 JST 2001 TAR-SIZ
  11/25-13:26 . 1435  Christine Hall <> [82]
Building Delegate 7.7.0 in OS/2
  11/27-01:04 . 1436 [25]
  Happy Thanksgiving, all (especially if it's not a holiday where you are) I took a break over the holiday weekend to build the new Delegate 7.7.0 on OS/2. (Isn't this what everyone does over the holi
Ftp server, "220 line command" and buildin -sed filter
  11/27-06:46 . 1437  Damien <> [56]
  Hello ! I try to build a ftp server like this : delegate -P21 SERVER="ftp://test:test@test.." But when client connect to my server, they see comment about the connection with the server lik
  11/27-08:03 . 1438 (Yutaka Sato) [44]
  Customizing response messages should be done by "MOUNT" for definitions of built-in messages in general, but it is not supported yet in this case. Generic option to hide real name of target server s
Re[2]: [DeleGate-En] Ftp server, "220 line command" and buildin -sed filter
  11/27-08:22 . 1439  Damien <> [60]
  Thanks for this fast answer :) Tuesday, November 27, 2001, 12:03:27 AM, you wrote : PGP FingerPrint 4252 4FE6 F29B E385 291D 99F3
Building Delegate 7.7.0 in OS/2
  11/27-08:40 . 1440 (Yutaka Sato) [28]
  Hi, Happy Thanksgiving, although it's not holiday in Japan :p Thank you. I will fix it in the next release (7.7.1) Cheers, Yutaka @ @ Yutaka Sato <>
DeleGate/7.7.1 -- fix for OS/2
  11/28-18:07 . 1441 (Yutaka Sato) [21]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.7.1.tar.{gz,bz2} DATE: Nov 28 17:42 JST 2001 TAR-SIZ
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:02/19 20:37:43 (2 sec) Expires:02/20 02:37:41 @_@V