Articles delegate-en/54-121 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 54 - 121   digest:
Bandwidth shaping/choking
  09/01-22:45 . 0054  Shez <> [6]
  Hiya, I was wondering if it would be sensible to do bandiwidth choking through the use of an external filter. Cheers Shez
Delegate for Win 95/NT
  09/03-22:07 . 0055  "Brian Marko" <> [7]
  Hello, I'm trying to acquire the source for Delegate Win 95/NT Does anyone know where I can get this source? Thanks!
  09/04-09:18 . 0056 (Yutaka Sato 佐藤豊) [22]
  on 09/03/98(22:08:45) There is no source program of DeleGate devoted to Windows. The source distribution of DeleGate which is commonly used on any platforms is:
How to use http/nntp proxy
  09/04-16:35 . 0057  "Rob Guikers" <> [7]
  I'm trying to access a news-server via delegated, but it won't come through. I already have delegated running as a http-proxy. Can anyone give me an example on how to access Newsgroups via Delegated
  09/04-16:45 . 0058 (Yutaka Sato 佐藤豊) [17]
  If you are going to use DeleGate as a proxy for NNTP clients, just say: delegated -P119 SERVER=nntp://your-news-server Cheers, Yutaka Yutaka Sato <> @ @ C
Help with Delegate
  09/05-02:37 . 0059  "William H. Geiger III" <> [162]
  Hi, I am trying to run delegate on my Warp4 OS/2 machine as a nntp proxy. I am able to connect to the nntp server through delegate but when I issue the LIST command delegate gets the list of newsgro
  09/05-03:04 . 0060 (Yutaka Sato 佐藤豊) [27]
  In general, the simplest way to escape a protocol dependent problem, bypassing proper setup of necesssary environmnet, is just doing transparent relay like: % delegated -P8119 SERVER=tcprelay://ades
  09/05-04:18 . 0061  "William H. Geiger III" <> [54]
  Unfortunately I *do* need protocol dependent value-added services (the combining of multiple nntp servers to form a virtual server). Also I plan on using this program for much more thn just nntp but
Delegated as Proxy POP Mail
  09/07-18:47 . 0062 [10]
  I have problems with some pop mail server accessing via delegated: my case is: delegated as pop proxy on port 1110 because I have a POP Mail Server running on same machine; servers work ok are pop.n
delegate ftp loose connection
  09/08-22:33 . 0063  "Piero Berritta" <> [29]
  Hi, I'm still testing delegate to create a tunnel ssl between a client and a server ftp not ssl using the following comand lines: Client side: delegated -P21 FSV="sslway -co" SERVER=ftp://ftp-server
  09/09-00:39 . 0064 (Yutaka Sato 佐藤豊) [57]
  Hi Piero, on 09/08/98(22:31:02) ^^^ Thank you for your report which is easy but enough to reproduce the problem. I enclosed a patch to fix it. Closing already closed (freed) STREAM on LINIX seems to
Delegated as Proxy POP Mail
  09/09-01:23 . 0065 (Yutaka Sato 佐藤豊) [21]
  Unfortunately I can't. I suppose detailed dialog between the server and DeleGate, which will be got by running DeleGate with '-vv' or '-vd' option, may be helpful to understand what is happening. Ch
How to use http/nntp proxy
  09/09-01:50 . 0066 (Yutaka Sato 佐藤豊) [23]
  Otherwise if you wish to use a DeleGate for HTTP client as a gateway for NNTP server, as delegated -P8080 MOUNT="/netnews/* nntp://your-news-server" Th
Help with Delegate
  09/09-04:12 . 0067 (Yutaka Sato 佐藤豊) [36]
  I see. Such usage of DeleGate is what I wish users to do :) Sorry but I know little about OS/2. I heard that you need "EMX" environment to make and use DeleGate on OS/2 (I don't know what EMX means
  09/09-04:35 . 0068  "William H. Geiger III" <> [52]
  EXM are a collection of added libraries & tools to aid in the porting of Unix programs to OS/2. It is used with gcc for compiling. Ok, I had downloaded the OS/2 binaries rather than the source code
Bandwidth shaping/choking
  09/09-05:05 . 0069 (Yutaka Sato 佐藤豊) [22]
  I remember that adaptive choking was one of the original motivations to introduce the "external filter" interface. But I'm not sure if the current implementation of the external filter is applicable
need manual proxy
  09/09-05:07 . 0070  "MOHD. SHUBAIR" <> [12]
  hi, i am used manual proxy since three month ago , itis , and port number is 10080, now this proxy not working well , and take time to give the site i needed,spicialy the sex
  09/09-05:18 . 0071 (Yutaka Sato 佐藤豊) [19]
  I think you sent your message to NOT APPROPRIATE address. This mailing-list is for exchanging technical information about DeleGate among its users who administrate the system. Cheers, Yutaka Yutaka
Help with Delegate
  09/09-05:31 . 0072 (Yutaka Sato 佐藤豊) [25]
  All I know is that "__EMX__" must be given as a predefined name to activate stuffs embedded in several *.{h,c} files with #ifdef directives ... Cheers, Yutaka Yutaka Sato <> http://ww
  09/09-07:00 . 0073  "William H. Geiger III" <> [38]
  Ahhh, ok that is similar to what I do when I have to add watcom specific changes to code __WATCOMC__. I'll do the re-compile and see how it goes. Thanks, William H. Geiger III
  09/09-07:26 . 0074 (Yutaka Sato 佐藤豊) [28]
  Mr. Ueno writes in his page "" [in Japanese/ISO-2022-JP] (You can make the binary just by "make CC=gcc") I suppose __EMX__ is predefined in the preprocessor
Preffered interface
  09/09-17:53 . 0075  "Vadim V. Chepkov" <> [20]
  Hello! I tried to use delegated (v. 5.6.5) but have found a problem. I have multirouted host on which I've installed delegated with one ethernet card whith a few IP-addresses as aliases. One of them
  09/09-20:23 . 0076 (Yutaka Sato 佐藤豊) [48]
  -P option specifies the interface to be used to accept connections from clients, that is the destination of connection. What you require is another thing; how to specify the source of connection to
Another FTP timeout...
  09/10-17:40 . 0077  Erik Wang <> [44]
  Hi, Following is the log of connection timeout. I had set at "": delegated -P1126 and connect by: the is a Serv-U ftp s
Help-Win NT MultiHoming & DeleGate
  09/10-18:51 . 0078  "H. Tomaya" <> [32]
  I have installed the DeleGate Proxy on the departmental Win NT server which is supposed to re-route its client HTTP requests to the company's firewall/proxy server. The complication is that the depa
FW: Delegate for Win 95/NT -> NDIS driver
  09/12-04:01 . 0079  "Brian Marko" <> [3]
  Is Delegate for Win 95/NT implemented using an NDIS driver?
NNTP not working
  09/12-11:26 . 0080  Jocelyn Bernier <> [30]
  Hi, I am trying to use Delegate to be able to use NNTP from one server only and it is not working. I used : -P8119 server=nntp:// When I try to connect , I see the first message but
  09/12-11:54 . 0081 (Yutaka Sato 佐藤豊) [19]
  DeleGate with "-vv" option will show information helpful to investigate what is going on... Cheers, Yutaka Yutaka Sato <> @ @ Computer Science Division, E
  09/12-12:03 . 0082  Jocelyn Bernier <> [32]
  I think I found what happening in the log file. I don't have access to the news server because delegate use my station IP address and send it to the news server. How can I force delegate to send the
  09/12-12:16 . 0083 (Yutaka Sato 佐藤豊) [23]
  I don't understand that "DeleGate sends IP address to the news server"... Could you show me the part of your log indicating it ? Cheers, Yutaka Yutaka Sato <>
  09/12-12:23 . 0084  Jocelyn Bernier <> [83]
  server"... 09/11 22:45:55.62 [266] 0+0: --INITIALIZATION DONE-- 09/11 22:45:55.62 [266] 0+0: Non-Blocking I/O not supported(WIN) 47:55 [266] spawn() = 312, children(alive=1,total=1) 09/11 22:48:00.7
  09/12-12:45 . 0085 (Yutaka Sato 佐藤豊) [34]
  *>ConnectToServer connected [25] { <-}[0.030s] This log shows nothing but a "MODE READER" command is sent to the server. DeleGate is connecting the server via the
  09/12-12:50 . 0086  Jocelyn Bernier <> [41]
  Yes it is. I tried from the server with TELNET on port 119 to be sure and it is working fine. From any host contacting delegate it is not. The log say that it use ??? Then it should wor
  09/12-13:55 . 0087 (Yutaka Sato 佐藤豊) [23]
  The line I marked with "*" shows that a TCP connection to the server is established from the source port "" to the destination port "". Cheers, Yutaka Yutaka Sato <
  09/12-15:13 . 0088 (Yutaka Sato 佐藤豊) [39]
  Can you sucessfully do like follows from your DeleGate's host? % telnet 119 The following log can be interpreted as the server accepts your connection as NNTP server mode, but it
Transparent FTP caching proxy
  09/12-23:24 . 0089  Abid Atilay <> [20]
  Hi, I have FreeBSD-2.2.7 machine and want to setup a transparent ftp caching proxy at home. I have installed delegated 5.5.7, ipfilter 3.2.9, natd, squid 1.2.beta24, tried all of them but couldn't s
NNTP not working
  09/13-00:57 . 0090  Jocelyn Bernier <> [38]
  17-Dec-1996 ready Wow this is not easy. I will describe you what I want to do and you could tell me how to do it. I want to use my server (with delegate on it) as a NNTP gateway. Since my service pr
FW: Delegate for Win 95/NT -> NDIS driver
  09/14-14:39 . 0091 (Yutaka Sato 佐藤豊) [20]
  Cheers, Yutaka Yutaka Sato <> @ @ Computer Science Division, Electrotechnical Laboratory ( - ) 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568 Japan _< >_
problems with sslway using a proxy
  09/14-19:20 . 0092  "Piero Berritta" <> [32]
  Hi Yutaka, Still trying the ftp ssl tunnel, I tried to use another delegate as a Proxy ftp server, between two a delegate client and a delegate server. The configuration (tried on three different ma
  09/14-22:03 . 0093 (Yutaka Sato 佐藤豊) [52]
  Hi Piero, on 09/14/98(19:17:46) I suppose the key point is "MODE XDC", which enables transmission of data on control channel (which is encrypted by SSLway in your case). If MODE XDC is enabled, you
XDC MODE with Proxy
  09/15-01:06 . 0094  "Piero Berritta" <> [36]
  Hi Yutaka, thanks for reply. Actually the problem seems to be the XDC MODE. I cannot get the proxy in XDC MODE, even if I applied the patch you sent me in a previous mail to force delegate in XDC MO
  09/15-19:28 . 0095 (Yutaka Sato 佐藤豊) [81]
  Hi Piero, on 09/15/98(01:04:34) I see. I recognized two problems; XDC mode has not been supported in (not bound) proxy FTP-DeleGate, and FTP-DeleGate which forwards to another with "PROXY" parameter
FTP problem
  09/17-20:03 . 0096  Szabo Robert <> [24]
  Hello Friends, Excuse me, to disturb you, but I need help. I want to use delegate for ftp proxy on Linux. %firewall> ./delegated -P21 SERVER=ftp AUTHORIZER=localhost -vd It seemd work, but some minu
  09/18-03:56 . 0097 (Yutaka Sato 佐藤豊) [26]
  Could you show me more around the log? Also the result of "where" command of "gdb delegated /var/spool/delegate/work/21/core" will be helpful to track the bug. As long as I remember, the AUTHORIZER
Proxy ftp crash
  09/19-01:41 . 0098  "Piero Berritta" <> [56]
  Hi Yutaka, Thanks for your precious answer. I found another problem trying to use the delegate as a tunneler and putting a proxy between the client and the server: Client side: delegated -P21 FSV="s
FTP problem
  09/22-09:18 . 0099 (Yutaka Sato 佐藤豊) [64]
  Hi Robert, on 09/22/98(06:42:53) (Sato is my family name :-) Though I could not reproduce the situation, I found a strange point in your log which records "*" as IDENTified user name in spite of the
  09/22-19:09 . 0100 (Yutaka Sato 佐藤豊) [21]
  I found another certain source of SIGSEGV by FTP-DeleGate on Linux. In the function relay_data() in "ftp.c", after calling cache_done() in cache.c, FILE *cachefp is duplicatedly closed, to cause SIG
Proxy FTP
  09/22-21:50 . 0101  "Piero Berritta" <> [9]
  Hi Yutaka, the problem I issued in my previous mail is present only in Windows NT system, but not in Linux systems (and in generally in Unix systems, I think). Moreover, it generates only when sslwa
  09/23-00:27 . 0102 (Yutaka Sato 佐藤豊) [238]
  Hi Piero, on 09/22/98(21:48:23) Thank you for your helpful information. I think I understand the problem. on 09/19/98(01:38:49) ^^^ Basically, the problem will be solved by replacing makeDataConn(po
http/pop - Is it possible?
  09/23-16:09 . 0103  Alex Bel <> [7]
  Hi, I'd like to see my mail box (pop3) by http protocol, is it possible? If yes, how? Alex Bel.
  09/23-16:14 . 0104 (Yutaka Sato 佐藤豊) [25]
  From Manual.txt: Cheers, Yutaka Yutaka Sato <> @ @ Computer Science Division, Electrotechnical Laboratory ( - ) 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568
Still some problem with Proxy FTP
  09/23-19:18 . 0105  "Piero Berritta" <> [45]
  Hi Yutaka, I tested the patch you send me, and now there is no crash running the Proxy in a Windows NT machine. Unfortunately using now sslway it seeems that the data channel is not encrypted. The s
  09/24-14:03 . 0106 (Yutaka Sato 佐藤豊) [31]
  on 09/23/98(19:15:51) Remember that the current DeleGate cannot insert bi-directional type filters (like SSLway) into FTP data channel. SSLway filter can be inserted into control channel, and the XD
Fw: [DeleGate-En] Still some problem with Proxy FTP
  09/24-17:19 . 0107  "Piero Berritta" <> [77]
  Hi Yutaka, sorry cause I was not very clear. The configuration I meant was: Client: delegated -P21 FSV="sslway -co" SERVER=ftp://ftp_server_name:8022 PROXY=proxy_name:8021 Proxy delegated -P8021 FSV
env vars
  09/24-18:39 . 0108 (Oliver Hertel) [19]
  Hiho! How do I correctly export the environment variables? I start a perl script as cgi. That script must know, which client software is used... I try this via $client=ENV{'HTTP_USER_AGENT'}; But I
Ftp problem
  09/24-19:03 . 0109 (Yutaka Sato 佐藤豊) [115]
  The day before yesterday, I did some fix on FTP-DeleGate which may be relevant to your problem. [""] And today, I did another fix to avoid treating ca
  09/24-19:19 . 0110 (Yutaka Sato 佐藤豊) [11]
  Sorry, I missed to spell the version. "DeleGate/5.6.8" is correct. Cheers, Yutaka Yutaka Sato <> @ @ Computer Science Division, Electrotechnical Laborator
Multiple POP-servers ?
  09/25-00:31 . 0111  Engelhard <> [19]
  Can I do this with delegate ? delegate pop server | +---+---+ | | | pop server1 pop server2 pop server3 for user for user for user a ~ g h ~ p q ~ z So when the user engel wants to retrieve his mail
  09/25-02:55 . 0112 (Yutaka Sato 佐藤豊) [58]
  From doc/Manual.txt: This shows that you will be able to satisfy the requirement with: -P8110 \ SERVER=pop \ MOUNT="a* pop://server1/a*" \ MOUNT="g* pop://server1/g*" \ MOUNT="h* pop://server2/h*" \
Ftp problem
  09/25-03:25 . 0113  Robert Szabo <> [35]
  Dear Yutaka! You have been solved the problem with ftp-patch! :))) I was fascinated, how fast You wrote, and how efficient was Your solution!!! You're excellent programmer. Congratulation! I think S
Fw: [DeleGate-En] Still some problem with Proxy FTP
  09/25-04:56 . 0114 (Yutaka Sato 佐藤豊) [56]
  Hi Piero, on 09/24/98(17:16:29) Sorry, I missunderstood of which DeleGate your log was... I made sure it by "FTOCL=-tee" which dumps messages sent to clients on control connection, showing no data w
env vars
  09/25-05:14 . 0115 (Yutaka Sato 佐藤豊) [40]
  "CGIENV" parameter controls passing of NON-CGI environment variable like PATH or HOME. I recommend you from the simplest and direct testing like this. (1) prepair /tmp/env.cgi including like this wi
  09/25-08:40 . 0116 (Oliver Hertel) [57]
  Hiho! Ah. [...] This works. But THIS does not work: ---start (script)--- delegated -P8089 -v ADMIN=root@sarah.. FTOCL=cfi.conf ---end--- ---cfi.conf--- Content-Type: text/html Filter: ---end
  09/25-12:36 . 0117 (Yutaka Sato 佐藤豊) [44]
  You should specify your filter in "CGI:" field, not in "Filter:" filed, if your filter expects the interface compatible with CGI. I recommend you to see the difference betweeen Filter and CGI using
  09/26-01:49 . 0118 (Oliver Hertel) [20]
  Hiho! Does not work. Result of $ENV{'HTTP_USER_AGENT'} is always "". 8-( The same perl-script in /cgi-bin of the http-server is working correct. But not as cgi for the proxy. Ciao, Oliver http://www
  09/29-00:48 . 0119  Oliver Hertel <> [14]
  Hi! I tried everything. But the HTTP environment vars are not available when starting a cgi from delegate (SunOS5). Any other hints except using CGI: instead of FILTER: ?? I need it badly... Ciao, O
  09/29-01:13 . 0120 (Yutaka Sato 佐藤豊) [17]
  I forgot to tell you that a value of a request header "Field" is available in FTOCL filter by the name "HTTP_X_REQUEST_Field". Thus the User-Agent field will be available with the name "HTTP_X_REQUE
  09/29-01:44 . 0121  Oliver Hertel <> [15]
  Ah! Working now, thank you very much. :-) Ciao, Oliver Hertel My software never has bugs. It just develops random features.
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:02/19 20:39:10 (3 sec) Expires:02/20 02:39:07 @_@V